Tuesday, March 19, 2013

WRO2013 Senior High Video Explaination

Building Robot Borobudur Shrine Restoration WRO 2013

BASE

CLAMPER

Building Robot Komodo Island WRO 2013

WRO 2013 - Elementary - Another Solution

WRO 2013 - Picking the outer eggs

Next step in our sample solution for the 2013 challenge of World Robot Olympiad (WRO): Komodo Island for senior high is to collect all red eggs lying closest to the edge. The color sensor in the front of the robot is not able to read the color of the eggs standing further away from the edge.

WRO 2013 - Getting started by traveling around Komodo Island

WRO2013 Senior High-Simple Solution

WRO2013 Senior High-Challenge Overview

WRO 2013 - Senior High - Komodo Island

Predule

Komodo is one of the 17,508 islands that make up the Republic of Indonesia. The island is particularly notable as the natural habitat of the Komodo dragon, the largest lizard on earth and consequently named after the island. Komodo has a surface area of 390 km² and a permanent population of over 2,000.

The Komodo dragon (Varanus komodoensis), a member of the monitor lizard family (Varanidae), is the largest living species of lizard, growing to a maximum length of 3 metres (9.8 ft) in rare cases and weighing up to around 70 kilograms (150 lb). Their unusual size has been attributed to island gigantism, since there are no other carnivorous animals to fill the niche on the islands where they live.

Mating begins between May and August, and the eggs are laid in September. About twenty eggs are deposited in abandoned megapode nests or in a self-dug nesting hole. The eggs are incubated for seven to eight months, hatching in April, when insects are most plentiful. Young Komodo dragons are vulnerable and therefore dwell in trees, safe from predators and cannibalistic adults. They take about eight to nine years to mature, and are estimated to live for up to 30 years.

Komodo dragons were first recorded by Western scientists in 1910. Their large size and fearsome reputation make them popular zoo exhibits. In the wild their range has contracted due to human activities and they are listed as vulnerable by the IUCN. They are protected under Indonesian law, and a national park, Komodo National Park, was founded to aid protection efforts. (Wikipedia)

Challenge

Game Table in 3D

Table Definitions

"Komodo Island" is all the elevated platform on the table.
"Seaside" is the white area surrounding "Komodo Island"

Challenge Objects

Figure 1. Red and blue ball on top of a "ball holder".
(#9797 LEGO MINDSTORMS Education NXT Base Set ball + LEGO plate 2×2)

Red balls represent Komodo eggs which must be preserved. Blue balls represent other species' eggs.

Challenge Overview

The robot's mission is to travel around the Komodo island, collect and count the number of Komodo eggs, and carry them back to the Base area. Only the Komodo eggs should be collected and carried back to the Base area. Other species eggs may not be removed from their original places.

The robot can solve the challenge in different ways: either it goes on the "Komodo Island" or around the "seaside" to collect the eggs.

Match Definition

Rules & Regulation

Multiple programs in the robot are allowed. For scoring round, the participants are only allowed to choose program and press the enter button to run it. Participants are not allowed to make any additional input or setting to the chosen program.
The maximum dimensions of the robot before it starts are 250 mm × 250 mm × 250 mm. After it starts, the dimensions of the robot are not restricted.
Before starting the challenge, the robot must be placed within the Base area (Zone 2, Zone 3, and Zone 4 are all defined as Base area). Once physical adjustments have been made to the satisfaction of the participants, the judge will give the signal to start. No part of the robot is allowed to exceed the Base area before it starts.
The robot's mission is to travel around the Komodo Island, collect and count all the red balls, and carry them back to the Base area. Only the red colored balls should be collected and carried back to the Base area. The blue colored balls must not be removed from their original places (on top of a "ball holder").
A red ball is considered to be "carried" only if the ball remained within contact with the robot and not having contact with the table after the end of the challenge (a ball which is in contact with the table will not be considered as "carried").
The number of red and blue balls, along with their positions on the table, will be randomly decided at the start of each round (post-quarantine). The total number of balls is 12. For example, if the number of red balls is 2, the number of blue balls will be 10; if the number of red balls is 4, the number of blue balls will be 8.
There are 14 ball holders but only 12 of them will be used (there will be 2 empty ball holder; see 2.2. Table Definition). The positions of the balls will be fixed for all participants in that particular round.
The number of red balls used in one particular round will determine the required "finish position". For example, if the number of red balls is 2, the robot must stop in Zone 2. If the number of red balls is 4, the robot must stop in Zone 4.
At the end of the challenge, the robot must return to the Base area and stop completely. The robot is considered to have entered to the “Base area” if any part of the robot is touching the base area. If the robot does not stop autonomously, then it will be considered to have finished in “incorrect” zone.
After the robot has returned to the Base area, the most front part of the robot that is in contact with the table (for example, a wheel or any other part that is in contact with the table) will determine its "finish position" (whether it is in Zone 2, Zone 3, or Zone 4). See illustrations below for details.

(a) Finish position of the robot is Zone 3.

(b) Finish position of the robot is Zone 2

Robot may detached or drop LEGO parts onto the track to assist in completing the mission objective. The main part of the robot (NXT, motor, sensors) will need to enter the base area as described in point 10.
The robot is free to choose its own route for collecting the balls (for example, left, middle black line, or right).
Your attempt and time will end if:

Robot is touched by any team member after it starts.
Challenge time (2 minutes) has ended.
Robot has returned to the Base area.
Participant call for "Stop" of the match.
Violation of the rules and regulations herein.

Scoring

Score will only be calculated at the end of the challenge.
Red ball removed from their original position = 5 points per ball.
Blue ball untouched (remained in their original position at the end of the challenge) = 5 points per ball.

To get the "Blue Ball Score" the robot must at least have removed one of the red balls from its original position.

At least one (1) red ball "carried" back to the Base area = 10 points.
All red balls carried back to the Base area = 20 points.
Robot stopped at the correct "finish position" = 10 points.
Maximum score = 100 points.
If teams acquire the same score, ranking is decided by the fastest time.

Red ball		Blue ball		At least one red ball carried to Base	All red ball carried to Base	Finish position
Remove from original position	Stay on original position	Removed from original position	Stay on original position	At least one red ball carried to Base	All red ball carried to Base	Correct zone	Incorrect zone
5 points per ball	0 point	0 point	5 points per ball	10 points	20 points	10 points	0 point

Table 1. Score allocation.

Scoring Example

		Round 1 (2 red ball, 10 blue ball)		Round 2 (3 red ball, 9 blue ball)
		Team A	Team B	Team A	Team B
Red ball	Removed from original position	2 balls (2×5 points = 10 points)	2 balls (2×5 points = 10 points)	2 balls (2×5 points = 10 points)	3 balls (3×5 points = 15 points)
Red ball	Stay on original position	0 ball (0×0 points = 0 points)	0 ball (0×0 points = 0 points)	1 ball (1×0 points = 0 points)	0 ball (0×0 points = 0 points)
Blue ball	Removed from original position	0 ball (0×0 points = 0 points)	2 balls (2×0 points = 0 points)	2 balls (2×0 points = 0 points)	1 ball (1×0 points = 0 points)
Blue ball	Stay on original position	10 balls (10×5 points = 50 points)	8 balls (8×5 points = 40 points)	7 balls (7×5 points = 35 points)	8 balls (8×5 points = 40 points)
At least one red ball carried to Base		2 balls (10 points)	1 ball (10 points)	2 balls (10 points)	3 balls (10 points)
All red ball carried to Base		Yes (20 points)	No (0 points)	No (0 points)	Yes (20 points)
Finish position	Correct zone	Yes (Zone 2) (10 points)	Yes (Zone 2) (10 points)	No (Zone 4) (0 points)	No (Zone 4) (0 points)
Finish position	Incorrect zone	No (Zone 2) (0 points)	No (Zone 2) (0 points)	Yes (Zone 4) (0 points)	Yes (Zone 4) (0 points)
Mission time		00:45.18	00:40.20	00:55.12	01:03.20
Final score		100 points (10 + 0 + 0 + 50 + 10 + 20 + 10 + 0)	70 points (10 + 0 + 0 + 40 + 10 + 0 + 10 + 0)	55 points (10 + 0 + 0 + 35 + 10 + 0 + 0 + 0)	85 points (15 + 0 + 0 + 40 + 10 + 20 + 0 + 0)

Table 2. Scoring example.

Table Specification

Horizontal Dimensions

Vertical Dimensions

General Information

The size of the game table is 2400 mm × 1180 mm.
Base consists of three zone: Zone 2, Zone 3, and Zone 4 (see Table Descriptions).
The size of Zone 2, Zone 3, and Zone 4 is 1180 mm × 150 mm. The total size of the entire Base area is 1180 mm × 450 mm.
Komodo Island is located at the center of the table. See 4.1 and 4.2 for detailed information of its size.
The height of the wall is 40 mm.
The width of the black lines and red line is 20 mm.
There are 14 ball holders which are spread in Zone A, Zone B, and Zone C (see Table Specification I and II). Ball holder is made of LEGO plate 2×2 which is attached to the top of the island.
There are a total of 12 balls, consists of:

Minimum two (2) and maximum four (4) red ball.
Minimum eight (8) and maximum ten (10) blue ball.

The balls in used came from the #9797 LEGO MINDSTORMS Education Base Set.

WRO2012 - Sinior High Regular Category Robot Van Gough

WRO 2012 Regular Category Robot Van Gough - Finals (Team Taiwan 1) - World Silver Medalist

WRO 2012 Regular Category Robot Van Gough - Finals (Team Taiwan 2) - World Gold Medalist

WRO 2012 Junior High School Demo

WRO2013 Junior High - Challenge Overview

WRO2013 Junior High - About through the valley

Robot may detached or drop LEGO parts onto the track to assist in completing the mission objective.

The main part of the robot (NXT, motor, sensors) will need to enter completely the “Finish Area” as described in point 5.

WRO 2013 - Junior High - Borobudur

Predule

Borobudur, or Barabudur, is a 9th-century Mahayana Buddhist monument in Magelang, Central Java, Indonesia. The monument consists of six square platforms topped by three circular platforms, and is decorated with 2,672 relief panels and 504 Buddha statues. A main dome, located at the center of the top platform, is surrounded by 72 Buddha statues seated inside a perforated stupa. Built in the 9th century during the reign of the Sailendra Dynasty, the temple’s design in Gupta architecture reflects India's influence on the region, yet there are enough indigenous scenes and elements incorporated to make Borobudur uniquely Indonesian. The monument guides pilgrims through an extensive system of stairways and corridors with 1,460 narrative relief panels on the walls and the balustrades.

Worldwide knowledge of its existence was sparked in 1814 by Sir Thomas Stamford Raffles, then the British ruler of Java, who was advised of its location by native Indonesians. Borobudur has since been preserved through several restorations. The largest restoration project was undertaken between 1975 and 1982 by the Indonesian government and UNESCO, following which the monument was listed as a UNESCO World Heritage Site. Borobudur is still used for pilgrimage; once a year Buddhists in Indonesia celebrate Vesak at the monument, and Borobudur is Indonesia's single most visited tourist attraction. (Wikipedia)

Challenge

Game Table in 3D

Table Definitions

Challenge Objects

Figure 1.Black and Grey Relic Statue.
(Three LEGO bricks + one LEGO plate in height, 4×4 studs in size with a LEGO minifig on top)

Grey Relic statue represents statues that are in good conditions.
Black Relic Statue represents statues that are in bad condition, and need to be sent back for restoration.

Figure 2.Stupa.
(Four LEGO bricks in height, 7×7 studs in size)

A stupa (from Sanskrit: m., स्तूप, stūpa, Sinhalese: ස්ථූපය, Pāli: थुप "thūpa", literally meaning "heap") is a mound-like structure containing Buddhist relics, typically the remains of Buddha, used by Buddhists as a place of worship. After "stupa", "chorten" is the most commonly encountered English term. The term "reliquary" is sometimes used, after a Christian functional equivalent. Stupas are an ancient form of Mandala (Wikipedia).

Challenge Overview

Match Definition

Rules & Regulation

Multiple programs in the robot are allowed. For scoring round, the participants are only allowed to choose program and press the enter button to run it. Participants are not allowed to make any additional input or setting to the chosen program.
The maximum dimensions of the robot before it starts are 250 mm × 250 mm × 250 mm. After it starts, the dimensions of the robot are not restricted.
The robot begins in the Start area (green zone) and finishes in the Finish area (red zone).
The robot must start within the Start area. No part of the robot is allowed to exceed the Start area before it starts.
The robot's mission is to move from the Start area through the valley (parts of the robot is allowed to touch the bottom part of the valley), and head towards the stupas which cover the relic statues. The robot will have to lift up the stupas and place them completely outside of the “Grey Square”. The robot will then need to collect the black colored relic statue and bring it to the Finish area through the stairs. The robot is considered to have reach the Finish area completely if all parts of the robot that are in contact with the table are inside the Finish area.
Robot may detached or drop LEGO parts onto the track to assist in completing the mission objective. The main part of the robot (NXT, motor, sensors) will need to enter completely the “Finish Area” as described in point 5.


No part is in the "Finish" area	Not all parts are in the "Finish" area	"Finish" completely

The stupas and the relic statues inside are placed on the 4 square areas surrounding the elevated square. Both stupa and relic statues are made of various LEGO parts (See Figure 1 and Figure 2).
There are 4 stupas (cages) and 4 relic statues (3 relic statues are grey colored and the other one is black colored). The grey colored relic statues must not be removed from the "Grey Square" area. Penalty will be given if the grey relic statues are taken out of the area.
The position of the black colored relic statue will be randomly decided at the start of each round. The relic statues position will be fixed for all teams on that round.
Your attempt and time will end if:

The robot is touched by any team member after it starts.
Challenge time (2 minutes) has ended.
The robot has returned to the Finish area.
Participant call for "Stop" of the match.
Violation of the rules and regulations herein.

Scoring

Score will only be calculated at the end of the challenge or when time stops.
The robot pass through the valley completely = 10 points.
Stupa moved outside the “Grey Square” completely = 10 points x 4 stupas = 40 points.
All stupas moved outside the “Grey Square” completely = 20 points.
Black relic statue moved outside the “Grey Square” = 10 points.
Finish condition:

The robot reach the Finish area without the black relic statue = 10 points
The robot reach the Finish area with the black relic statue = 20 points.

Maximum score = 100 points.
If teams acquire the same score, ranking is decided by the fastest time recorded.

Passing through valley	Stupa moved outside the “Grey Square”	All stupas moved outside the “Grey Square”	Black relic statue moved outside the “Grey Square”	Finish condition
				without black relic statue	with black relic statue
10 points	10 points per object	20 points	10 points	10 points	20 points
Penalties : 5 points penalties will be deducted for each grey relic statue outside the “Grey Square”.

Table 1.Scoring allocation.

Scoring Example

		Round 1
		Team A	Team B
Passing through valley		10 points	10 points
Stupa moved outside the “Grey Square”		4×10 points = 40 points (4 stupas)	2×10 points = 20 points (2 stupas)
All stupas moved outside the “Grey Square”		20 points	0 points
Black relic statue moved outside the “Grey Square”		10 points	10 points
Finish condition	with black relic statue	Yes (20 points)	No (0 points)
	without black relic statue	No (0 points)	Yes (10 points)
Penalty (grey relic statue outside the “Grey Square”)		0 points (no grey relic statue outside)	-5 points (1 grey relic statue outside)
Mission time		00:45.18	00:40.20
Final score		100 points (10 + 40 + 20 + 10 + 20 + 0 + 0)	45 points (10 + 20 + 0 + 10 + 0 + 10 - 5)

Table 2. Scoring example.

Table Specification

Horizontal Dimensions

All size in mm.

Vertical Dimensions

All size in mm.

Valley & Stairs Dimensions

All size in mm.

General Information

The size of the game table is 2440 mm × 1220 mm.
The table is surrounded by a wall which is 20 mm in width.
The width of the black line in the playing field area is ± 20 mm.
The table base color is white, except for the black line, grey square area, start, and finish area.
The table consists of a lowered board (the valley) which is 50 mm in depth, a series of ascending and descending stairs (6 steps, each steps have different height).
The elevated square is 100 mm in height and 300 mm in length.
There are 4 squares surrounding the elevated square which are 100 mm in length.
The error tolerance of the field is ± 50 mm.

Building Instructions for “Relic Statue”

Building Instructions for “Stupa”

WRO2012 Junior High Regular World Champion

WRO2012 Junior High Regular World Champion from Thailand

WRO 2012 Bintulu hawks ( Robot Columbus)

WRO 2012 ( Robot Columbus) Malaysia

48 sec + complete mission

WRO2013 Elementary Mission Example

WRO2013 Elementary - Example Solution

WORLD ROBOT OLYMPIAD 2013
Regular Category Elementary School
The Color of Indonesia-Batik

Monday, March 18, 2013

WRO 2013 Elementary design

wro 2013 elementary design

WRO 2013 - Dual color sensor line alignment

Dual color sensor line alignment

WRO2013-Elementary-Challenge Overview

WORLD ROBOT OLYMPIAD 2013
Regular Category Elementary School
The Color of Indonesia-Batik

Also note that the rules here are still preliminary. The final version of challenge will be confirmed by early February. From admin of WRO2013 Community.

WRO 2013 - Elementary - Batik

Prelude

Batik is a cloth that is traditionally made using a manual wax-resist dyeing technique. In one form or another, batik has worldwide popularity. Now, not only is batik used as a material to clothe the human body, its uses also include furnishing fabrics, heavy canvas wall hangings, tablecloths and household accessories. In Indonesia, batik popularity has had its tidings. Historically, it was essential for ceremonial costumes and it was worn as part of a Kebaya dress, which was commonly worn every day. The existence and use of batik was already recorded in the 12th century and the textile has since become a strong source of identity for Indonesians. UNESCO designated Indonesian batik as a Masterpiece of Oral and Intangible Heritage of Humanity on October 2, 2009. (Wikipedia)

Game Table in 3D

Table Definitions

Challenge Objects

Figure 1. Color Objects
(4×4x2 brick made out of 2x4 LEGO bricks with 1x2 tiles on top).

Figure 2. The cylinder with a size of 60 mm (d) × 100 mm (h) each will be used. (It will be made out of PVC pipe, weighing about 70 g each)

Figure 3. The hurdle. (They will be made out from 2 LEGO Technic Brick 1x16)

Challenge Overview

"Finish Zone A" or "Finish Zone B".

Match Definition

Rules & Regulation

Multiple programs in the robot are allowed. For scoring round, the participants are only allowed to choose program and press the enter button to run it. Participants are not allowed to make any additional input or setting to the chosen program.
The maximum dimensions of the robot before it starts are 250 mm × 250 mm × 250 mm. After it starts, the dimensions of the robot are not restricted.
The robot has to be placed within the Start area. No part of the robot is allowed to exceed the "Start" area before the match is started. When participants have arranged the physical position of the robot to their liking, the judge will give the signal to start.
At the start of each round, the sequence of the color objects and the color position of sorting bins will be randomized. The Sequence of the color objects and position of sorting bins will be fixed for all participants for that specific round.
The "Finish Area" is divided in two zone, "Zone A" and "Zone B" (see Table Definitions 2.2).
The robot's mission is to begin from the Start area, carrying 5 color objects and place them completely into the correct sorting bins in the correct sequence, pushing/moving the cylinder outside of the Cylinder Zone completely and move it completely into the Storage Area in standing vertical position, and enter the Finish area completely. The robot is considered to have entered Finish area completely if all parts of the robot that are in contact with the table are inside the Finish area.
Robot may detached or drop LEGO parts onto the track to assist in completing the mission objective. The main part of the robot (NXT, motor, sensors) will need to enter completely the “Finish Area” as described in point 6.


No part is in the "Finish" area	Not all parts are in the "Finish" area	"Finish" completely

Before a match is started, participants will have the opportunity to load/arrange the 5 color objects in the robot anyway they want. The color objects may not be loaded or re-arranged after the match has started.
The robot must place 5 color objects into the sorting bins in the correct sequence (the sequence will be randomized). To get the "Placed in the correct sequence" score, the objects must be placed one at a time in a way that could clearly be seen by the judge. If the sequence is not clear (i.e. the robot placed two objects at one time), the judge will have the final decision to give the score.
Your attempt and time will end if:

The robot is touched by any team member after it starts.
The challenge time (2 minutes) has ended.
The robot has entered the Finish area completely.
Participant call for "Stop" of the match.
Violation of the rules and regulations herein.

Scoring

Scores will only be calculated at the end of the match.
Placing a color object into its matching colored bin = 10 points (max 50 points).
All color objects placed in the correct sequence = 10 points.
Moving/pushing the cylinder out of Cylinder Zone completely = 10 points.
Moving/pushing the cylinder into the storage area completely:

Cylinder in standing vertical position = 10 points.
Cylinder not in standing vertical position = 5 points.

The robot enter the Finish area completely:

In Zone A = 10 points.
In Zone B = 20 points.

Maximum score = 100 points.
If teams acquired the same score, ranking is decided based on the fastest time.

Color Object (5 objects)		Cylinder Position			Finish Position
Placed correctly into the color bins	Placed in the correct sequence	Outside original position completely	Into storage area completely		Zone A	Zone B
			Standing Vertical	Not Standing Vertical
10 points per object	10 points	10 points	10 points	5 points	10 points	20 points

Table 1. Score allocation.

Scoring Example

			Round 1 (Red, Blue, Green, Blue, Green)		Round 2 (Blue, Green, Green, Red, Blue)
			Team A	Team B	Team A	Team B
Color Object	Placed correctly color objects into the color bins		5 object (5×10 points = 50 points)	4 object (4×10 points = 40 points)	4 object (4×10 points = 40 points)	3 object (3×10 points = 30 points)
Color Object	Placed in the correct sequence		Yes Bonus: 10 points	No Bonus: 0 points	Yes Bonus: 10 points	Yes Bonus: 10 points
Cylinder Position	Outside original position completely		10 points	10 points	10 points	10 points
	Into storage area completely	Standing Vertical	Yes (10 points)	Yes (10 points)	No (0 points)	Yes (10 points)
	Into storage area completely	Not Standing Vertical	No (0 points)	No (0 points);	Yes (5 points)	No (0 points)
Finish Position	Zone A		No (0 points)	Yes (10 points)	No (0 points)	No (0 points)
Finish Position	Zone B		Yes (20 points)	No (0 points)	Yes (20 points)	Yes (20 points)
Mission time			01:10.18	01:05.20	0:58.34	0:55.20
Final score			100 points (50 + 10 + 10 + 10 + 0 + 0 + 20)	70 points (40 + 0 + 10 + 10 + 0 + 10 + 0)	85 points (40 + 10 + 10 + 0 + 5 + 0 + 20)	80 points (30 + 10 + 10 + 10 + 0 + 0 + 20)

Table 2. Scoring example.

Table Specification

Horizontal Dimensions

All size in mm

Vertical Dimensions

All size in mm

General Information

The dimension of the playing field is 2440 mm × 1220 mm.
The playing field is surrounded by boundary walls 40 mm in height and 20 mm ± 1 mm in width.
The error tolerance of the field is ± 50 mm.
The table base color is white, except for “Start”, “Finish”, Cylinder Zone, Sorting Bins and Storage Area.
The playing field consists of The Hurdle, Black Line and separator Walls.
The width of the black line in the playing field area is 20 mm ± 1 mm. Color objects are made of 4×4x2 brick made out of 2x4 LEGO bricks with 1x2 tiles on top (see Figure 1).
The cylinder size is 60 mm (diameter) × 100 mm (height). It will be made of PVC pipe, weighing about 70 g each (see Figure 2).
The Hurdles will be made of 2 LEGO Technic Brick 1x16 (see Figure 3).

Building Instruction for “Color Object”

Ukraine team in WRO 2012

Ukraine is the black horse of the group of WRO 2012.
More photos on http://vynahidnyk.org/media-center/159.html
Below is the media video from Ukraine.

WRO 2012 Regular Category Robot Organizer - finalist 1

2012 WRO Kuala Lumpur, Malaysia (Closing)

2012 WRO Kuala Lumpur, Malaysia

WRO KL 2012 Elementary School

WRO 2012 elementary school level game challenges you to build a robot that is capable of organizing objects back into their respective storage cells. Let's get started!

WRO 2012 Robot Organizer Surprise Rule

1. There will be 4 extra ping-pong balls (2 red and 2 blacks) on the playing field.
2. The robot's mission is to push the BLACK ping-pong balls off the holder, and make sure the RED ping-pong balls remain on the ball holder at the end of the game.
3. Each BLACK ping-pong ball pushed off the ball holder = 10 points.
4. Each RED ping-pong ball that remains on the ball holder = 10 points.

Pages

Tuesday, March 19, 2013

Challenge

Game Table in 3D

Table Definitions

Challenge Objects

Challenge Overview

Match Definition

Rules & Regulation

Scoring

Scoring Example

Table Specification

Horizontal Dimensions

Vertical Dimensions

General Information

Challenge

Game Table in 3D

Table Definitions

Challenge Objects

Challenge Overview

Rules & Regulation

Scoring

Scoring Example

Table Specification

Horizontal Dimensions

Vertical Dimensions

Valley & Stairs Dimensions

General Information

Building Instructions for “Relic Statue”

Building Instructions for “Stupa”

Monday, March 18, 2013

wro 2013 elementary design

Prelude

Game Table in 3D

Table Definitions

Challenge Objects

Challenge Overview

Match Definition

Rules & Regulation

Scoring

Scoring Example

Table Specification

Horizontal Dimensions

Vertical Dimensions

General Information

Building Instruction for “Color Object”